?
Manage My Life

How do I change the starter on my 2001 KIA Sportage?

What needs to be removed to remove starter?

Tags
Automotive
Sign in to answer a question
1 Answer from this member:
Manage My Life
According to the KIA technicians’ reference, here is the process of replacing your starter.

Remove old starter.

Connect B-terminal wire.

Install washer and nut on B-terminal and tighten.

Connect S-terminal.

Lower intake manifold bracket into position and insert the two upper bolts.

Raise and support vehicle.

Place starter in position.

Insert the two upper starter bolts.

Insert lower starter bolt. NOTE: The starter may require adjustment after installation. If required, rotate the starter slightly to provide proper clearance.

Tighten the three starter bolts. Tighten the bolts to 27-40 lb-ft (37-54 N•m).

Insert lower bracket bolts and tighten. Tighten the bolts to 27-40 lb-ft (37-54 N•m)

Position clutch release cylinder and install bolts. Tighten the bolts to 27-40 lb-ft (37-54 N•m)

Tighten the two upper intake manifold bolts. Tighten the bolts to 27-40 lb-ft (37-54 N•m)

If you require further assistance please resubmit question with more details. I will be looking forward to helping you again in the near future.

Note: Our imaging system is malfunctioning. I would like to apologize in advance if the attachments do not appear online.
by Manage My Life
January 4th, 2010
Comment
0 votes
Didn't find what you are looking for? Ask a question