?
Manage My Life

What does code: F 11 mean on my Kenmore front-loading washer?

Model: 110.45088 400 Kenmore front-loading washer

Tags
Kenmore , Washers
Sign in to answer a question
2 Answers from these members:
Mark T
I see that Barbara H has given you a link to a previous answered question. I would like to add the following information. The F 11 error code can be difficult to diagnose. I recommend checking all of the electrical connections on the machine control, motor control, and the door lock. I have provided you with the instructions for removing the access panels. Then remove and reconnect the wire connectors on the control bards. The vibration of the washer can cause the connectors to loosen up over time. After checking all of the connections, reinstall the panels, plug the washer in. test the washer in a drain, and spin cycle. If the washer still errors out I suspect a faulty motor control. I recommend calling a service technician to diagnose the problem because of the cost of the parts. If you ordered a motor control and it did not fix the washer, you cannot return an installed control board.

Please unplug the washer before attempting any repairs.



I hope this is helpful. If you need further assistance, please reply with more details below.

Thank you for using Manage my life.

Here is a link to order any parts you need.

Sears Parts Direct

.

You can have it repaired at your home by a Sears technician. Here is a link for the website:

Sears Home Services

.
by Mark T Earned 1,607 community points in Kenmore
September 20th, 2010
Comment
0 votes
Manage My Life
Error codes can be challenging. The owner's manual is a good place to get explanations for many codes. If it does not have it , I found a similar question form a previous post that may help. I attached the links below. Hope this helps!
by Manage My Life
September 18th, 2010
Answered in 10 minutes
Comment
0 votes
Didn't find what you are looking for? Ask a question