Is there an out of balance switch on my Kenmore washer?
I have a Kenmore washer model number 110.28322700. When the washer has an out of balance load & starts shaking it will not shut off. I need to know if my washer has an out of balance switch.
to answer a question
1 Answer from this member:
After reviewing the service manual for your washer, there is not an out of balance switch on this model. Be sure to not overload the washer. Only fill the tub to the top row of holes in the spin basket. Wash loads that are of the same type fabric. Be sure the load is balanced out. Start the washer in a spin cycle & you can check if the floor is weak by standing in front of the washer & feel if the floor is moving. You can also put a glass of water on the floor 4-5 inches from the front of the washer & in spin if the water splashes out you can tell if the floor is weak. Make sure the washer is level. If the washer is still giving you problems I would recommend calling for service.
Didn't find what you are looking for?
Get up to