What would cause my gas oven to heat only to 200 when set to 350?
I need to know what would cause my Kenmore gas oven model number 665.75822000 to heat only to 200 degrees when set to 350.
to answer a question
1 Answer from this member:
Be sure that the control is set to readout F & not C. If the control is set to read F & you have 200 degrees temperature when set to 350 then I suspect the temp sensor has failed. You will need to remove the temp sensor located in the oven cavity & use an ohm meter to measure the sensor resistance. The temp sensor should read close to 1100 ohms at 76 degrees. Other possibilities; igniter, oven control or wiring harness problems.
Didn't find what you are looking for?
Get up to
On Wall Ovens