?
Manage My Life

self cleaning oven code F2 while cleaning model no. 911.41785

The beeping is also driving me crazy, help!!!

Tags
Wall Ovens , Appliances
Sign in to answer a question
3 Answers from these members:
Lyle W
The F2 indicates that the control senses an over-temperature condition. This could be caused by a failed oven temperature sensor probe or a number of other failures.

If you have a volt/ohm meter, you can

shut off the circuit breaker

and check the resistance of the oven temperature sensor probe. The image below shows how to access this component. The resistance of the temperature sensor should be around 1100 ohms at room temperature. If it is over 2500 ohms, then the sensor is apparently causing this F2 code. Replacing the sensor (part WB23T10002) will likely fix your problem in this situation.

You can order parts from the

Sears PartsDirect

website.

If the sensor is okay, you could have a problem with the wiring harness, the electronic oven control board or thermal switches. I recommend that you have a service technician diagnose and repair the oven if the sensor is apparently okay. Here is a link for the Sears Service website:

Sears Home Services

.

If you need more help, reply with additional details and we will assist you further.
by Lyle W Earned 2,989 community points in Appliances
October 29th, 2010
Comment
0 votes
Manage My Life
there is no link...but thanks for trying...finally pulled the breaker.
by Manage My Life
October 28th, 2010
Answered in 8 hours
Comment
0 votes
Joseph Perez
I understand how inconvenient it can be to have an error code on your oven and I know how annoying the beeping can become so I will be more than happy to help you. While you are waiting for an expert answer, I did manage to find a link that will provide you with more information about your problem. I hope my link is useful.
by Joseph Perez Earned 1,551 community points in Appliances
October 27th, 2010
Answered in 10 minutes
Comment
0 votes
Didn't find what you are looking for? Ask a question