How do you remove Broiler drawer?
we cant find installation instructions in manuals to remove broiler drawer so we can reach area to convert to lp gas. can you help.
go to this link: http://www.sears.com/shc/s/s_10153_12605_Appliances_Cooking+Appliances_Freestanding model number 79070402012
there doesnt appear to be any clips on this drawer on either the inside or outside of drawer glides. there also are no wheels; drawer just slides out.
we looked at a faq from a year ago but it wasnt pertinent to this unit.
to answer a question
5 Answers from these members:
Having to work on a Oven can be quite a challenge. I have taken the time research on the Manage My Life website and was able to find some information that you may find useful. While you are waiting for an expert to reply I have attached a link below if you would like to take the time to view. I hope the information provided is useful.
well that is the link i went to last night but it talks about clips and we dont see any...thanks for trying to help.
here is a pretty good picture of what we are dealing with. the only other thing we can try to do is reach in thats a hard reach and we want to do it safely and right.
According to the manufacturer, on this model of range you should be able to access the regulator by removing the bottom oven panel and the flame spreader. There may be a cover over the regulator. If you are not able to access the regulator in that manner, then you can remove the broiler drawer by inserting a small screw driver in the slot that is in the outer rail. I circled the approximate location in the image below. If you insert a screw driver in that slot, you can release the inner rail from the outer one on each side and then remove the broiler drawer. If you still need more assistance, reply with additional details and we will try to help you further.
Didn't find what you are looking for?
Get up to