Manage My Life

Kenmore HE2 Plus washer, model 110.47512600, 3 years old. It has started leaving grease spots (slightly darker than original color) on my cloths. What now?

I ran the clean cycle but that didn't help.

I've been told it maybe a transmission problem but this model apparently doesn't have a transmission.

What could it be?

Kenmore , Washers
Sign in to answer a question
2 Answers from these members:
Sam A
Thank you for your question.

I can understand your concern when you are getting grease spots on your clothes.

You are correct in that this washer does not have a transmission.

I would suggest that you examine the inside of the door boot to see if it has some build up trapped in the folds of the rubber boot that may need to be cleaned by hand with detergent.

There is a slight possibility that the spin bearing and seal have failed and it could be putting a grease stain on the clothes.

I would suggest that you remove the back panel of the washer and look behind the big drive pulley where the basket shaft comes through the outer tub at the bearing and see if there is any staining or a dip line down the back of the outer tub from that bearing and seal area.

If there is then the water seal has failed and will need to be replaced.

Then I would run it through another clean cycle with a product called Affresh.

I will give you a link for this product.



I hope this will help.

Thank you for using Manage My Life.
by Sam A Earned 735 community points in Kenmore
February 9th, 2011
0 votes
To view more answers
Join Now
Didn't find what you are looking for? Ask a question