Thank you for your question.
I am sorry you are having problems with the blower. I have looked up the model number you have submitted. If you still do not have spark from the plug after replacing the plug and the module I recommend checking the air gap. The air gap is the apace between the module and the magnet on the flywheel. The gap between the two should be .012. Once you have set the air gap, check the engine for spark. If you still do not have spark remove the kill wire from the module if your model has one (some models do not have a kill wire to the module) and check for spark again. If you have sparked the kill wire is shorted to ground. If you still do not have spark check magnet on the flywheel. It should hold something metal if held close to it. Once the magnet has been checked, the problem is either a defective spark plug or module.
Please let me know if you need further assistance.
Here is a link to order any parts you need.
Sears Parts Direct
If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations:
Sears Home Services
Thank you for using Manage my life.