?
Manage My Life

My Duet dryer Has an Error Code F01

My Whirlpool Duet Dryer Model# WED9400SU is not working it's giving me an Error code of F01?

Tags
Dryers , Dryers , Whirlpool , Washers
Sign in to answer a question
7 Answers from these members:
Manage My Life
I have a whirlpool duet sport gas model number WGD8300SW1, It started with F-1 error code, I checked control board and it had burn mark, so I changed it. the F-1 code is gone but I have NO heat. I take any help!
by Manage My Life
November 24th, 2012
Comment
0 votes
Korinna Sierra
Hello Sam. WED9400SU is a partial model number that brings up 3 models. Two of the model have the same part number for the control board, while the other is different. Once you have the complete model number of your specific model, you can search for the part and purchase it from Sears PartsDirect. The diagram you want to be looking at is the "Dryer Cabinet" diagram. The control board you need is number 41 on the diagram.

I really hope this information helps you today. For further assistance, please respond to this thread. I will be delighted to assist you. Thank you for using ManageMyLife.com
by Korinna Sierra Earned 351 community points in Washers
November 16th, 2012
Comment
0 votes
Manage My Life
What would be part number for control board, where can I get one, and finially how much?
by Manage My Life
November 14th, 2012
Comment
0 votes
Korinna Sierra
Please be sure to unplug the dryer prior to attempting any service or repair. I have included the instructions from the service manual that explain the process. Look it over and if you do not feel comfortable performing the task, service can be scheduled at the Sears Home Services link I provided above. For further assistance, please respond to this thread. I hope this helps.
by Korinna Sierra Earned 351 community points in Washers
September 18th, 2012
Comment
0 votes
Manage My Life
Is it easy to replace the control board?
by Manage My Life
September 17th, 2012
Comment
0 votes
Korinna Sierra
I see Pvalde2 provided you with good information however, it does not pertain to a dryer. The F-01 error code indicates a primary control board failure on this model of dryer. If the error cleared after unplugging it for 20-30, then the control board could have received a power surge or glitch through the electrical lines. Completely disconnecting the electrical power and then reconnecting it will sometimes reset the board and it will operate properly. If your dryer continues to operate properly, then resetting the control board may have fixed your problem.

If the dryer motor continues to stop working, then you may have a bad control board. A wiring problem or drive motor failure could also prevent the dryer from continuing to run properly. A technician is normally needed to diagnose and repair this type of problem.

If the F-01 returns and will not clear, then you will need to replace the control board in the dryer.



If you do not feel comfortable repairing the unit yourself, service can be scheduled at the following link:

Sears Home Services

. For further assistance, please respond to this thread with more detail. I hope this helps.
by Korinna Sierra Earned 351 community points in Washers
January 5th, 2012
Comment
0 votes
Manage My Life
A Washer is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.
by Manage My Life
January 3rd, 2012
Answered in 16 minutes
Comment
0 votes
Didn't find what you are looking for? Ask a question