Kenmore Elite He4 dryer problem
My Kenmore Elite He4 dryer model 110.85089401 will not turn. lights are on, panel seems normal, power to machine is ok, checked for any objects blocking, band sems to be one (tension on the drum)..door closes normally etc..
what would be causing this issue..? what parts would correct the problem...
to answer a question
2 Answers from these members:
Having a properly working dryer is very important. I found some information for you that I am hoping will help you with the dryer. I am adding the link below to help you with your question while you wait for your expert response. It may take 24-48 hours. I do hope that this will help you out.
If the lights and display work but the dryer will not run the usual suspect on an electric dryer is the thermal fuse. The thermal fuse is located behind the lower access panel on the blower exhast. It can be checked for continuity with a meter is one is available. A broken belt might also cause this problem. The 2nd image below may help you access the thermal fuse. If no meter is available then the thermal fuse can be bypassed. Let me know if you would like to know more about this.
Didn't find what you are looking for?
Get up to