Skip to content
Craftsman

Craftsman 10" Table Saw with Laser Trac

Item# 00921807000P | Model# 218073 | Added on July 26, 2010 |
Sold by Sears.com
$284.99
$349.99
Rewards
You can earn on this product: $2.85 in points
-
+
Add To Cart
Description Specifications
A Clean Cut with Every Pass The Craftsman 10" table saw is great for a variety of projects, from ripping sheets of plywood and slotting boards to building perfect boxes. The Laser Trac® guidance system lines up every cut for extra precision. An extendable out-feed support gives you more control and makes it easier to work with long work pieces. A solid fixture to any shop, but always ready to move, this table saw detaches from its base for portability that will keep it moving with you every time duty calls.

  • Full kit includes: 36T carbide tipped saw blade, 2 AAA batteries, dust bag, blade wrenches & push stick
  • 15 amp motor delivers 5,000 RPM for smooth, fast rips and cuts
  • Wide base means stable support for pieces big and small
  • Clamp together design allows this saw to break down fast
  • Dual roller wheels means more jobsite and shop portability
  • Laser Trac® delivers precision, accuracy and speedy cuts
  • A pair of table side extensions delivers cuts up to 24" wide
  • Dust collection bag removes and empties fast
  • Out-feed extension supports long pieces easily
  • Miter gauge is indexed every 15° for fast, accurate cutting
  • On-board storage accommodates rip fence, miter gauge
  • Some assembly required
This product comes with:
Owner's Manual (1)Product Warranty
WARNING: California Residents - Proposition 65
Ratings & Reviews

Overall Rating:

Average
(675 Ratings)
  • 5 Stars
    (358)
  • 4 Stars
    (185)
  • 3 Stars
    (42)
  • 2 Stars
    (37)
  • 1 Star
    (53)
  • Read Reviews
Member Photos

Most Helpful Reviews:

Praise
By Swwbbp
March 26th, 2009
For the money, can't be beat.

Not that I love everything about the table. The dust-bag, like all, is a joke. The knive takes some getting used to, and it did need some adjustments out of the box. Pros - sturdy, powerful, portable, accurate. Cons - Blade, dust bag, knife adjustment, won't take a standard Dado. This is not a contractor saw, they make professional grade tools for that. This is a home or medium duty shop saw. The included blade is not the best, so upgrade right away, and take the time to make the adjustments and align. This saw will handly almost anything you throw at it around the house, and not skip a beat. Sure, I'd love a better Dado set-up, but with the money I saved I'll buy a router and table and get more precise cuts anyway. I call it a win win. If you are looking for a heavy duty professional grade saw, this isn't it, but for the average user, it's more than enough.

32 found this review helpful
Criticism
By Craftsman10insaw
January 13th, 2017
Not worth it in the long run

I bought this saw almost two years ago and i am more disappointed in it now than i was the day I set it up. Honestly I bought it because I couldn't afford a 5-800$ saw so I settled for this one.Woodworking to me is prettymuch a hobby but I do make money at it so i make my purchases sometimes based on that income and need. But as I write this I am looking into other brands and saws of better quality. As one guy plainly and honestly put it this saw is for lite duty infrequent use only.The laser is absolutely useless and inaccurate, so unless you like looking at it take it off or ignore it.The tabs on the miter slots are a total nuisance and the miter slot itself is an 1/8th wider than the miter gauge bar itself,the miter gauge is made entirely of plastic/aluminum as most are now days,and very inaccurate as well, the throat plate sits low in the middle,high on the exit end and low on the entry end, you can put it in a vise to try and flatten it/even it out but the dimples on the underside and the tabs on the frame are the problem.The side extensions as well as the back extensions are of little use, extend them any at all and they drop down below the cutting table by as much as a half inch if not more when fully extended.You will have to prop the extensions up with something to get any kind of support with them.If you're using the fence on either extension with it extended then you will have to take extra time to square the extension/fence to the blade or your cut will be nowhere near accurate. The cranks for both the blade and the miter setting HAVE to be kept clean,blowed out frequently, the housing for the motor is made of soft plastic and sits too close to the saw caseing, on the side not getting enough air nor having enough exhaust, traps saw dust to easily.The motor gets hot,putting a strain on the bearings.There are no ports for a vacuum so you will have to cut those yourself but youre gonna have to fabricate at least two throatplates so you might as well make a day of it.There is a reason Sears is closing stores right and left and selling the craftsman product/name and this as well as products like this is one of them.A lot of people will take this saw out 4 or 5 times a year to cut some molding,a 2x2 or 2x4,maybe cut a pc of ply wood,mdf,luan,paneling etc. then this saw is for them it should last them a long time if they dont mind their miters being off,their cuts being uneven and their sheets being out of square, but if you are like me and use your saw almost daily for much more you will regret it when you get it.In Six months youll realize enough is enough,not much longer youll be looking for something else. There was a time that the craftsman name meant something, from power tools to hand tools but over the years thats become less and less so. Becouse of the price compared to the quality of their product they are failing as this saw will later down the road.

61 found this review helpful
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Jonathan Hole
| Earned 38 community points in Craftsman Exclusives
February 15th
William Zakrzewski
| Earned 7 community points in Craftsman

Love it....

|

Saw cuts smooth, fence is easy to attach. Overall an excellent saw for the money. Completed my first project and I loved all of the features and the quality

January 29th
0 of 0 found this review helpful.
Join or Sign In to vote
Cad-tech
have it

Excellent saw for the money

|

I have an older top of the line craftsman table saw at my main home, I bought this to keep at my cottage for small projects and it works great

January 22nd via sears.com
1 of 2 found this review helpful.
Join or Sign In to vote
searscom

Great saw. Very powerful

|

Very happy with saw. Got it on sale, had to put together but wasn't that bad. Saw performs great so far. Great price for what you are getting.

January 17th
2 of 3 found this review helpful.
Join or Sign In to vote
searscom

Very good saw for the price

|

Good solid table saw at a great price. Solidly built and stable. Cuts very accurately IF you go through the setup/alignment process outlined in the directions: No saw will cut straight and true without proper setup. My only 'ding' is that the box arrived looking like it had been through a war - which I blame on the shipper. Credit to Sears' packaging that all inside was nevertheless fine.

January 15th
2 of 2 found this review helpful.
Join or Sign In to vote
Questions & Answers (5) See All
Want to know something? Ask a question
Steven Fosnaugh
Craftsman 10" Table Saw with Laser Trac
Sold by Sears.com
April 3rd, 2017
Member Assist
By Member Assist
April 4th, 2017