Skip to content

Craftsman 19A30003799 42–46" 2-Bin Bagger

Item# 07124019000P | Model# 19A30003799 | Added on October 21, 2010 |
Sold by
Product is not available
Add To Cart
Description Specifications
Take a Break from the Rake Attach the Craftsman 2-bin bagger to your tractor and make collecting grass clippings and other yard debris super simple. Built for the long-haul, this bagger's durable steel frame and resin construction ensures years of use. The cloth bins can hold up to 6.5 bushels so you can cut down your time spent on unloading, which is very easy with ergonomic bottom handles.

  • Fits all tractors with 42"-46" side discharge decks, 2010 and after, for Craftsman (with 247 source code) Troy Bilt, MTD, Bolens, Yard-Man, Yard Machines, and Huskee Units
  • Large 6.5 bushel capacity to keep your lawn free from leaves, clippings and debris
  • Weighs only 71lb for exceptional maneuverability, portability and no-hassle storage
  • Trouble-free installation with some minimal assembly required
  • Durable steel frame and resin construction for season-after-season use
  • Slide out or lift out for easy dumping
  • Soft cloth bins are incredibly durable, holding up well use-after-use
  • Tell at a glance when bins are full
  • Bottom handles make emptying easier
This product comes with:
Owner's Manual (1)Product Warranty
WARNING: California Residents - Proposition 65
Ratings & Reviews

Overall Rating:

(123 Ratings)
  • 5 Stars
  • 4 Stars
  • 3 Stars
  • 2 Stars
  • 1 Star
  • Read Reviews
Member Photos
No photos yet...

Most Helpful Reviews:

By BobTfly
July 19th, 2017
Great product works well

I purchased this baggier for a new mower and love it. It is tight and well built

4 found this review helpful
September 28th, 2017
Terrible Cheaply made Dual Bagger

Don't buy this bagger. I bought it for my Craftsman Pro Zero Turn riding mower. The materials are cheap and it cannot pick up dry leaves on a hot summer day without getting clogged to the deck adaptor/attachment. I know because I tried mowing slowly without the chute connected and it was still getting clogged. Also disconnecting the chute is not quick and easy once you get clogged. Almost need a see through windows and quick disconnect, but it gets clogged way too often it's ridiculous. The foam tape around the tube at the bagger end got damaged/torn first day out. Poorly designed - the bracket to mower and vertical brace are over kill (not engineered) while the bags are cheap plastic and netting, which take all the abuse. Loved my previous dual bagger system but mower was 20 years old and time to replace it. Did find that my Cyclone rake deck adapter and 8" tube works very well, in place of the Craftsman adaptor and tube. So I paid over $300 for a cheap dual bag system. Sure you read good and bad reviews, and I don't usually ever submit a review, but this bagger system is so terrible I felt I had to write.

9 found this review helpful
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.


October 10th via bv
0 of 0 found this review helpful.
Join or Sign In to vote


September 24th via bv
0 of 0 found this review helpful.
Join or Sign In to vote
have it

Don’t waste your money


Bought item towards the end of summer last year. Took a little over an hour to assemble which wasn’t to bad. First time I used grass clippings would not get pushed up into bagger. When I took the upper tube off and tested the clippings shot out but when the upper tube was attached clippings would not get pushed into bagger. I decided to buy new blades. Once installed me blades clippings would make it to bagger. Next problem if grass is even a little wet clippings don’t make it past lower tube. If tried mowing 2 days after rain and grass is only slightly wet, clippings do not make it to bagger. When clipping do make it to bagger the bag closet to tube does not fill. Only the bag furthest away from tube fills once it is full grass clippings become clogged in tube again. Not a good product.

September 13th via mobile
0 of 0 found this review helpful.
Join or Sign In to vote
carlos santiago
| Earned 31 community points in Ready to Move
July 6th
Theresa Cowher
| Earned 23 community points in Craftsman
June 29th
Questions & Answers (6) See All
Want to know something? Ask a question