Skip to content

Craftsman 5-Drawer Workbench Module - Red/Black

Item# 00910133000P | Model# 10133 | Added on May 26, 2010 |
Sold by
Craftsman 5-Drawer Workbench Module - Red/Black
Product is not available
Add To Cart
Description Specifications
5-Drawer Red/Black Workbench Module Gets Your Shop In Order Now that you have a clear work surface in your shop or garage, keep it that way by adding a Craftsman 5-drawer red/black workbench module. This tough steel module can mount to either side of a Craftsman work bench, letting you design a work area that fits the way you prefer to work. You can use two modules if you have more tools that the five spacious drawers can hold. The 5-drawer red/black workbench module is coated with baked enamel coating, a treatment that will keep it in tip-top shape for years. The module can support 35 pounds of weight in drawers that glide smoothly on ball-bearing slides.

  • The Craftsman 5-drawer red/black workbench module adds storage space to your workbench, letting you keep your tools close at hand
  • The module is comes with drawers, slides and one support leg
  • It must be used with a work bench
  • It's made of solid steel with a baked enamel coating
  • Overall dimensions: 29-1/2" W x 18" D x 40-1/4" H
  • 35-lb. drawer load capacity
  • It can attach to either side of a Craftsman work bench, sold separately at Sears
  • You can use two models with each work bench
  • The adjustable leveling feet let you compensate for uneven floors
  • Full extension ball-bearing drawer slides glide smoothly for years
  • Pair the modules and bench with a Craftsman VersaTrack wall system to create even more storage space
  • Weight: 63 pounds
  • Assembly required
This product comes with:
Product Warranty
Ratings & Reviews

Overall Rating:

(117 Ratings)
  • 5 Stars
  • 4 Stars
  • 3 Stars
  • 2 Stars
  • 1 Star
  • Read Reviews
Member Photos

Most Helpful Reviews:

June 18th, 2012
Craftman 5-Drawer Workbench Module-red/black

I find that the Craftman 5-Drawer Workbench Module has made it possible to organize my power tools and my large tools. The workbench is very sturdy and with all of the mistreatment I have done it doesn't get dented and nor does the paint chip. The lock is great to have and works well. The drawers roll out smoothly. There is room to put an additional module or a Craftman 3-Drawer toolbox on top. I highly reccomend purchasing the Craftman 5-Drawer Module for work or at home.

6 found this review helpful
January 13th, 2013

I have several craftsman roll arounds and the steel on THIS ONE is so thin it doesnt compare to my older toolboxes. The quality is getting worse in Sears products. I purchased a 8 ft workbench and had to use a hacksaw to cut a v notch in the 8 ft lower support to fit the 5 drawer module i just added to it. That was a design flaw!

11 found this review helpful
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
| Earned 23 community points in Craftsman
February 25th



best addition to my workspace, smooth drawers

February 5th via
0 of 0 found this review helpful.
Join or Sign In to vote

Goes under my workbench


Like it steel not as thick as my old toolbox

January 19th via
0 of 0 found this review helpful.
Join or Sign In to vote
have it

Good storage, a little flimsy


This is a nice addition to my workbench, but is a little flimsy. It was easy to assemble.  It took me about 20 minutes.

September 12th via mobile
0 of 0 found this review helpful.
Join or Sign In to vote
have it

Dissapointed in Metal Quality


I have three older (20+ years) Craftsman workbenches and was looking forward to this larger new bench. The assembled unit looks great. Big Craftsman logo and familiar Craftsman red. The frame came in a box marked "Made in USA". It was nice and heavy duty. That is where the positives stop. I opened the drawer boxes that were NOT marked "Made in USA". It reminded me of cheap import tool boxes. Obviously from China. It was so thin some of the pieces were warped just from being so thin. The drawers were flimsy and the rails are no longer built into the drawer. I was hoping the drawer rails would be heaver than the drawer and add a lot of rigidity but alas it they were also thin. You have to screw the rails into the side of the drawers leaving an exposed nut inside the drawer. Possibly a knuckle buster. It assembled easily and is sturdier than I thought it would be. The lower rear back brace must be put on backwards as it is not notched to fit the unit. The drawers slide easily and is study enough to be functional. I'm not sure I would trust the large drawers with a lot of weight though. Knowing this now, I'm not sure I would have purchased it. This is not your Daddies Craftsman workbench. Come on Craftsman, bring up your quality!

August 16th via
1 of 1 found this review helpful.
Join or Sign In to vote
Questions & Answers (0)
Want to know something? Ask a question