I am giving this one star because on my handi-cut the anvil is useless unless you can do your own modifications. As mentioned by other reviewers, the hole for the set screw sleeve is too small. You must be able to file this out yourself in order to get it to fit. I was able to do it with my file but it is ridiculous that I have to! It is impossible to get anyone from Sears to talk to and if it were not for the kindness of other reviewers I would not have known how to modify it. Returning it would cost more than the entire set. The blades are fine and be sure not to have them in when you replace the anvil (but you knew that). If you are not able to modify the anvil, then get the set with just the replacement blades and use your old anvil till it falls out or they fix this issue, I guess. BTW, the only reason I say yes to recommend it to a friend (you have to pick yes or no) is because it is all we have unless you want to get an entirely new tool.
The replacement kit worked fine but you will have to drill out the hole in the plastic anvil for the existing barrel nut to fit.