Skip to content
GearWrench

GearWrench 891226 25pc 1/2-inch Drive Pass Thru Socket Set with Locking Flex Ratchet; SAE & Metric

Item# 00944915000P | Model# 891226 | Added on October 21, 2010 |
GearWrench 891226 25pc 1/2-inch Drive Pass Thru Socket Set with Locking Flex Ratchet; SAE & Metric
$164.96
Out of stock
Rewards
You can earn on this product: $1.65 in points
Product is out of stock
Add To Cart
Description Specifications
The GearWrench Locking flex head handle provides adjustable angles giving greater access. Design allows for 40 percent more strength than conventional square drive ratchets. Ratchet head is up to 50 percent slimmer than conventional ratchets. Pass thru ratchet and socket system eliminates the need for deep sockets. Includes: Longer length for improved reach and torque Includes 1/2" drive sizes: 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4" sockets; 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 24mm, 27mm, 30mm and 32mm sockets; 1/2" Square Drive Quick-Release Adapter and 6" Hollow Extension. Packaged in a blow molded case.
WARNING: California Residents - Proposition 65
Ratings & Reviews

Overall Rating:

Average
(8 Ratings)
  • 5 Stars
    (4)
  • 4 Stars
    (2)
  • 3 Stars
    (2)
  • 2 Stars
    (0)
  • 1 Star
    (0)
  • Read Reviews
Member Photos
No photos yet...

Most Helpful Review:

Praise
By oaklraid4
June 28th, 2018
GREAT GearRatchet SET!!

This 1/2 in. GearRatchet set is an amazing tool, if you are an auto mechanic and perform a lot front end work including wheel alignments this is the right set for you!!... I am a Tech level 2 and most of my work has to do with front end that requires a 1/2in. drive for more torque. The long ratchet can be used for better leverage at different angels. Also because of the pass thru sockets you don't have to worry about tight spaces or yet the use of deep sockets.. To all the Alignment Techs this is the tool that you would want to use when adjusting camber/caster angles specially on chevy trucks and suv's or any other vehicle that has the camber/caster adjustment.. So if you turn wrenches for a living i would strongly recommend this great Ratchet set.

2 found this review helpful
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Plant_mechanic

Love and hate it.

|

This IS a sweet set...But within the first few uses of it the angle adjustment skipped and messed up the teeth on the adjustment part of the ratchet head. So usually not a big deal just go back and trade it in except sears will not honor it and sends you to apex customer service Wichita is a pain and a half

June 28th via mobile
1 of 1 found this review helpful.
Join or Sign In to vote
oaklraid4

GREAT GearRatchet SET!!

|

This 1/2 in. GearRatchet set is an amazing tool, if you are an auto mechanic and perform a lot front end work including wheel alignments this is the right set for you!!... I am a Tech level 2 and most of my work has to do with front end that requires a 1/2in. drive for more torque. The long ratchet can be used for better leverage at different angels. Also because of the pass thru sockets you don't have to worry about tight spaces or yet the use of deep sockets.. To all the Alignment Techs this is the tool that you would want to use when adjusting camber/caster angles specially on chevy trucks and suv's or any other vehicle that has the camber/caster adjustment.. So if you turn wrenches for a living i would strongly recommend this great Ratchet set.

June 28th via sears.com
2 of 2 found this review helpful.
Join or Sign In to vote
KillSwitchNY

Best Innovation to the conventional ratchet

|

<p>If you have not had the pleasure of using any of Gear Wrench's Pass Thru sets, you do not know what you're missing. I have this set (the 1/2&quot;) and also the 3/8 + 1/4. Absolutely the best tool purchases I have ever made. No more using deep sockets or worrying about limited space. These socets will fit over any stud. Super strong sockets and wrench, have yet to break any. Only problem I have with this is that it comes with an adapter to make the wrench accept a standard socket as well. That adapter pops in from the back so as soon as you put any foward pressure on it, it pops out of the wrench.</p>

June 28th via sears.com
1 of 2 found this review helpful.
Join or Sign In to vote
forklfttech

5 stars

|

June 28th via sears.com
0 of 1 found this review helpful.
Join or Sign In to vote
Jerry Bottoms
| Earned 326 community points in gift finder - valentine's day
January 19th
Questions & Answers (0)
Want to know something? Ask a question