Skip to content

General International 4A 2-in-1 Belt & Disc Sander- BD7004

Item# 00950451000P | Model# BD7004 | Added on July 27, 2015 |
Sold by Sears.com
General International 4A 2-in-1 Belt & Disc Sander- BD7004
$135.96
$231.99
Rewards
You can earn on this product: $1.36 in points
-
+
Add To Cart
Description Specifications
Whoever said “if you’ve seen one sander you’ve seen them all”, was wrong. The General international 2-in-1 Belt/Disc Sander was built for versatility with its 0 to 45 degree tilting aluminum work table which can be adjusted for miter polishing. grinding and polishing flat and cambered surfaces.  Even the Belt table tilts 90 degrees from horizontal to vertical.  Quick release system ensures easy belt changes, Belt is easily adjusted with tracking knob.  Included with the belt disc sander is a miter gauge for steady sanding on angled edges, an L shaped stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. The 16-1/2 in x 4-7/8 in. belt sander tilts to work both horizontally and vertically for grinding and polishing flat surfaces. It has a 6 inch diameter Aluminum disc backing plate. This heavy duty belt sander is made with a solid cast iron base. The BD7004 Belt Disc Sander easily sands, smoothes and removes all of the jagged edges and splinters on your wood and lumber. With a 4 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you'll have the power to switch and replace sand paper grits as needed without wasting any time. The belt bed adjusts anywhere from 0 to 90 degrees to accommodate the needs of your particular work piece while the heavy cast-iron base prevents vibrations. With all of this in ... read more
This product comes with:
Owner's Manual (1)Product Warranty
WARNING: California Residents - Proposition 65
Ratings & Reviews

Overall Rating:

Average
(3 Ratings)
  • 5 Stars
    (1)
  • 4 Stars
    (0)
  • 3 Stars
    (1)
  • 2 Stars
    (1)
  • 1 Star
    (0)
  • Read Reviews
Member Photos
No photos yet...

Most Helpful Review:

Criticism
By easayaim
November 21st, 2017
Mounting hole not useable

The very first step asks you to mount the sander to a base. There are only two holes and one of them is too close to the apparatus to allow a bolt head or nut to seat properly.

4 found this review helpful
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Duc Nguyen
January 28th
jlvf250
have it

Instructions are hard to understand

|

Bottom plate rubs on the round disk. So I had to leave it off.

January 25th via sears.com
0 of 0 found this review helpful.
Join or Sign In to vote
easayaim
have it

Mounting hole not useable

|

The very first step asks you to mount the sander to a base. There are only two holes and one of them is too close to the apparatus to allow a bolt head or nut to seat properly.

November 21st via sears.com
4 of 6 found this review helpful.
Join or Sign In to vote
Questions & Answers (0)
Want to know something? Ask a question