Thank yoy for your question. The CL indicates the unit is in a Control Lock mode. This is sometimes referred to as child lock and is meant to prevent accidental option or cycle changes while the dryer is running. Check the keypads and look for a small padlock emblem. This is the keypad that turns the control lock feature on or off by pressing and holding the switch. If a model number is provided I can provide the keypad to press to turn off the control lock feature.

Hello Dave thanks for the inquiry about your refrigerators size. The fresh food section is 15.4 cubic ft. and the freezer side is 10. cubic ft. Your refrigerator offers a combined total shelf space of 24.8 sq. ft.
Hope this helps
Ron H.

Thank you for your question. Per the model number this is a 17 cubic foot upright freezer. I hope this helps.

Hello Gabriel, thank you for your question and I can understand your concern. Unfortunately, without the model number, I will only be able to provide some general information. The F90 error code indicates that the maximum oven door unlock time was exceeded. This can be caused by a failed door lock assembly, a wiring failure or a failed electronic oven control board. Try pressing in and holding the light switch and then pressing the STOP/CANCEL button while continuing to hold the light switch. This may cause the door lock mechanism to retract. You will need to continue to hold the door light switch in during the entire process of the door unlocking if this process works. If the door won't unlock, try holding the door switch in and programming a new clean cycle and then canceling it. This may reset the lock mechanism. If you are not able to reset the door lock then it may need to be replaced. In this case, I would recommend having a technician make this repair. You can call 1-800-469-4663 to schedule a tech to come out. I hope this will help you.

Hello Joshua, if this unit is freezing in the lower section adjust controls first, also if the drip tray(under the evaporator) has a extension on the back be sure it is extended, this will reduce the amount of cold air dropping below the evaporator. Also be sure the evaporator door is closing properly. If all fails you may need to replace the cold control.

Ron H.

the links provided by this "answer" has no bearing to my question & is therefore useless to me. will wait for something more relevant to the nozzle hose!

Searspartsdirect.com

is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner.



Thank you for using

Searspartsdirect.com

!

I can understand the beeping on the chest freezer can get annoying and if there is a way to disable it, the experts will find it.  Please submit the model number to get the correct information for your chest freezer. Click on reply to continue the thread.  

The dishwasher not competing the cycle can be concerning. I found some information for you that I am hoping will be able to help you. I am adding the link below to help you with your question while you wait for your expert response. It may take two business days for your expert to respond. I do hope that everything works out.

I can understand your concern when it comes to rust on the back of the Kenmore refrigerator. Other members had a similar concern on their refrigerators, which you will see in the link provided below. Hope this information is useful while waiting on additional information.