What does the F11 error code mean on my Kenmore Elite Quiet Pak2?
: The F11 error code indicates a serial communication error between the CCU (Central Control Unit) and the MCU (Motor Control Unit). A loose wire harness connection is the most common cause of this error code. It can also be caused by a failed MCU, a bad CCU, a failed drive motor and a problem with the washer door lock mechanism.
In some cases the control can be non-functioning or may not accept activation from the control panel. To clear and restart the control follow the these steps:
Unplug or turn the circuit breaker off for 30 seconds.
Reconnect the unit to the power source by turning the breaker back on or plugging the unit back into the wall outlet.
Press the Pause/Cancel/Stop button twice to clear the display.
Start a short cycle to check the operation of the machine by selecting a cycle and pressing and holding the start button until the machine starts.
Without a model number I am unable to provide specific information. For further assistance resubmit your question with the complete model number.