Thank you for submitting a question to Manage My Life.
You can try to drain your washer using the diagnostic cycle which I am including below. After you start the diagnostic go to step 9, turn the program knob (8) clicks from the start position. The drain pump and door lock solenoid will activate and the washer will operate in high spin.
If the washer does not drain in diagnostics, the diagnosis of this issue will require the use of a volt/ohm meter. If you have a meter and are confident in your technical abilities please reply below and I will be happy to assist you further.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website;
Sears Home Services
Here is a link that you may use to view the parts list diagram or purchase any parts needed for your appliance;
Sears Parts Direct
I hope this is helpful. Check the things I have covered here and if I may be of further assistance please reply to this post.