In reference to your Kenmore microwave, model number 665.61659;
Removing the oven door, the inner panel, and the door handle
: Sharp edges may be present
Unplug the microwave oven or disconnect the power
Open the microwave door
Pry the choke cover away from the top door pin, and remove the top pin from the pivot bracket. Lift the door off the bottom bracket, and remove it.
Place the oven door front side down on a padded surface
Remove the choke screws from the door frame.
Starting at the top right corner,pry the choke cover out with a putty knife, and unsnap it from the choke. Only remove the top, bottom and right sides of the choke cover at this time. Yon will remove the handle end of the choke cover later.
Starting at the top edge of the door near the center and working clockwise, use a putty knife, and pry the latching tabs of the choke out of the door frame slots. Lift the choke as you release the tabs so they do note snap back into slots.
: When you reach the handle side of the door, pull both the choke and the choke cover away from the door frame, and then separate the two components.
To remove the handle from the door frame, remove the two handle screws.
To remove the door switch actuators from the choke, remove the screw from each actuator.
: When you reinstall the door on the oven, insert the top pin into the pivot bracket and press down on the pin until it snaps into place.